1. Signaal on levialast väljas
Failure analysis:
1. The resolution of the LCD splicing screen is not adjusted properly. 2. The input source signal problem.
solution:
1. Adjust the resolution of the LCD splicing screen, the horizontal frequency or vertical frequency to adjust it to the best resolution.
2. Check whether the input source signal of the LCD splicing system is normal.
2. The whole screen does not light up
Failure analysis:
1. Power supply problem. 2. Problems with the screen or splicing box itself. 3. The machine is malfunctioning.
solution:
1. Kontrollige, kas toitejuhe on korralikult ühendatud; kui tegemist on lühisega, võib ilmuda mustvalge ekraan, mis põletab masina koheselt; või pingest ei piisa, kontrollige, kas liiteplaadi JP1 ja JP2 lühisekorgid on asetatud 12 V peale, kas toiteallika ja 24 V väljundi juhtmestik on õige.
2, it may be damaged during transportation, contact the manufacturer for repair.
3. Check whether the machine can start normally under normal power-on conditions.
3. Color or signal is unstable
Failure analysis:
1. The PC graphics card is faulty. 2. The signal line is faulty.
solution:
1. Reinstall the PC graphics card that spliced the large screen.
2. Check the signal cable of the LCD splicing screen.
4. The power indicator does not light up
Failure analysis:
1. The power supply is interrupted. 2. The power jack of the LCD splicing screen is faulty. 3. The splicing screen system is not turned on.
solution:
1. Check whether the power supply is interrupted.
2, test the power jack, plug the power cord of another product into the power jack just used.
3. Check whether it is turned on. If it is not turned on, turn on the power of the LCD splicing screen.
